В наличии
E14R00P06
Features and Benefits
- Industry leading PIM performance
- New 4.3-10 connectors for improved PIM performance and size reduction
- TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
- Designed to boost UP-Link Coverage and KPIs
- RET interface to control antenna RET actuators with AISG standard
- Single AISG with 1 RET connector
- Automatic LNA by-pass function
- Built in lightning protection
- 1 device with 2 sub-units
- Connectors “in line”
- 2 input ports and 2 output ports
Характеристики
RF Connector Interface
|
4.3-10 Female |
Protocol
|
AISG 2.0 |
Ширина
|
231 mm | 9.094 in |
Глубина
|
58.5 mm | 2.303 in |
Характеристики
RF Connector Interface
|
4.3-10 Female |
Protocol
|
AISG 2.0 |
Ширина
|
231 mm | 9.094 in |
Глубина
|
58.5 mm | 2.303 in |
Wind Speed, maximum
|
198 km/h | 123.031 mph |
Цвет
|
Gray |
Масса, нетто
|
4 kg | 8.818 lb |
Included
|
Mounting hardware |
Operating Temperature
|
-40 °C to +65 °C (-40 °F to +149 °F) |
Product Type
|
1-BTS:1-ANT (Uniplex) | Tower mounted amplifier |
Height
|
175 mm | 6.89 in |
Corrosion Test Method
|
IEC 60068-2-11, 30 days |
Ingress Protection Test Method
|
IEC 60529:2001, IP67 |
Relative Humidity
|
Up to 100% |
Lightning Surge Current
|
10 kA |
Lightning Surge Current Waveform
|
8/20 waveform |
Mounting
|
Pole | Wall |
Volume
|
2.3 L |
Voltage
|
7–30 Vdc |
Finish
|
Painted |
Operating Current at Voltage
|
100 mA @ 12 V |
License Band
|
IMT 2600, LNA |
Modularity
|
2-Twin |
Mounting Pipe Hardware
|
Band clamps (2) |
RF Connector Interface Body Style
|
Long neck |
Ground Screw Diameter
|
8 mm | 0.315 in |
Mounting Pipe Diameter Range
|
40–160 mm |
Branch
|
1 |
Port Designation
|
ANT |
Insertion Loss, maximum, dB
|
0.50 |
Insertion Loss, typical, dB
|
0.30 |
Return Loss, minimum, dB
|
18 |
Input Power, PEP, maximum, W
|
2,500 |
3rd Order PIM, typical, dBc
|
-160 |
3rd Order PIM Test Method
|
Two +43 dBm carriers |
Input Power, RMS, maximum, W
|
160 |
AISG Connector
|
8-pin DIN Female |
AISG Connector Standard
|
IEC 60130-9 |
Group Delay Variation, maximum, ns
|
10 |
License Band, LNA
|
IMT 2600 |
dc Switching/Redundancy
|
Yes |
Operating Current Tolerance
|
±15 mA |
Alarm Current, CWA Mode
|
185 mA ±10 mA |
Voltage, AISG Mode
|
10–30 Vdc |
Bandwidth, MHz
|
70.00 |
Gain, nominal, dB
|
12.0 |
Gain Tolerance, dB
|
±1 |
Noise Figure, maximum, dB
|
1.6 |
Noise Figure, typical, dB
|
1.5 |
Group Delay Variation Bandwidth, MHz
|
5.00 |
Output IP3, minimum, dBm
|
25 |
Insertion Loss - Bypass Mode, typical, dB
|
2.5 |
Return Loss - Bypass Mode, typical, dB
|
16 |
TX Band Rejection, minimum, dB
|
45 |
Insertion Loss Ripple, maximum, dB
|
0.10 |