В наличии
E14R00P02
Features and Benefits
- Industry leading PIM performance
- New 4.3-10 connectors for improved PIM performance and size reduction
- TMA is operating in AISG & CWA mode, Alarm Current consumption CWA mode 190 mA
- Designed to boost UP-Link Coverage and KPIs
- RET interface to control antenna RET actuators with AISG standard
- Single AISG with 1 RET connector
- Automatic LNA by-pass function
- Built in lightning protection
- 1 device with 2 sub-units
- Connectors “in line”
- 2 input ports and 2 output ports
Характеристики
|
RF Connector Interface
|
4.3-10 Female |
|
Protocol
|
AISG 2.0 |
|
Ширина
|
227 mm | 8.937 in |
|
Глубина
|
56 mm | 2.205 in |
Скачать
ПоделитьсяХарактеристики
|
RF Connector Interface
|
4.3-10 Female |
|
Protocol
|
AISG 2.0 |
|
Ширина
|
227 mm | 8.937 in |
|
Глубина
|
56 mm | 2.205 in |
|
Цвет
|
Gray |
|
Масса, нетто
|
4.5 kg | 9.921 lb |
|
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
|
Included
|
Mounting hardware |
|
Operating Temperature
|
-40 °C to +65 °C (-40 °F to +149 °F) |
|
Product Type
|
1-BTS:1-ANT (Uniplex) | Tower mounted amplifier |
|
Height
|
225 mm | 8.858 in |
|
Corrosion Test Method
|
IEC 60068-2-11, 30 days |
|
Ingress Protection Test Method
|
IEC 60529:2001, IP67 |
|
Relative Humidity
|
Up to 100% |
|
Lightning Surge Current
|
10 kA |
|
Lightning Surge Current Waveform
|
8/20 waveform |
|
Mounting
|
Pole | Wall |
|
Volume
|
2.8 L |
|
Voltage
|
7–30 Vdc |
|
Finish
|
Painted |
|
Operating Current at Voltage
|
110 mA @ 12 V |
|
License Band
|
DCS 1800, LNA |
|
Modularity
|
2-Twin |
|
Mounting Pipe Hardware
|
Band clamps (2) |
|
Ground Screw Diameter
|
8 mm | 0.315 in |
|
Mounting Pipe Diameter Range
|
40–160 mm |
|
Branch
|
1 |
|
Port Designation
|
ANT |
|
Insertion Loss, maximum, dB
|
0.70 |
|
Insertion Loss, typical, dB
|
0.40 |
|
Total Group Delay, maximum, ns
|
45 |
|
Return Loss, minimum, dB
|
18 |
|
Input Power, PEP, maximum, W
|
5,000 |
|
3rd Order PIM, typical, dBc
|
-163 |
|
3rd Order PIM Test Method
|
Two +43 dBm carriers |
|
Input Power, RMS, maximum, W
|
200 |
|
AISG Connector
|
8-pin DIN Female |
|
AISG Connector Standard
|
IEC 60130-9 |
|
Group Delay Variation, maximum, ns
|
13 |
|
License Band, LNA
|
DCS 1800 |
|
dc Switching/Redundancy
|
Yes |
|
Operating Current Tolerance
|
±20 mA |
|
Voltage, CWA Mode
|
10–18 Vdc |
|
Alarm Current, CWA Mode
|
195 mA ±15 mA |
|
Voltage, AISG Mode
|
10–30 Vdc |
|
Bandwidth, MHz
|
75.00 |
|
Gain, nominal, dB
|
12.0 |
|
Gain Tolerance, dB
|
±1 |
|
Noise Figure, maximum, dB
|
1.8 |
|
Noise Figure, typical, dB
|
1.4 |
|
Group Delay Variation Bandwidth, MHz
|
5.00 |
|
Output IP3, minimum, dBm
|
23 |
|
Insertion Loss - Bypass Mode, typical, dB
|
3.0 |
|
Return Loss - Bypass Mode, typical, dB
|
14 |
|
TX Band Rejection, minimum, dB
|
75 |
|
Insertion Loss Ripple, maximum, dB
|
0.50 |
|
RX Band Rejection, minimum, dB
|
45 |
