В наличии
3199122 | 075G(TD)110PP200ROPE
Характеристики
|
Рост
|
304.8 m | 1000 ft |
|
Цвет
|
Gray |
|
Масса, нетто
|
193.461 kg/km | 130 lb/kft |
|
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
Скачать
ПоделитьсяХарактеристики
|
Рост
|
304.8 m | 1000 ft |
|
Цвет
|
Gray |
|
Масса, нетто
|
193.461 kg/km | 130 lb/kft |
|
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
|
Product Type
|
Empty conduit |
|
Material Type
|
High density polyethylene (HDPE) | Polypropylene |
|
Product Brand
|
ConQuest® |
|
Conductor Type
|
Solid |
|
Nominal Size
|
3/4 in |
|
Conduit Type
|
Toneable |
|
Wall Type
|
Smooth |
|
Wall Thickness Designation
|
SDR 11 |
|
Density Test Method
|
ASTM D792A |
|
Density, maximum
|
0.955 g/cm³ | 0.035 lb/in³ |
|
Density, minimum
|
0.941 g/cm³ | 0.034 lb/in³ |
|
Design Standard
|
ASTM D3350-05 |
|
Inner Diameter, nominal
|
21.336 mm | 0.84 in |
|
Outer Diameter, nominal
|
26.67 mm | 1.05 in |
|
Wall Thickness, minimum
|
2.413 mm | 0.095 in |
|
Flexural Modulus, minimum
|
551.581 N/mm² | 80000 psi |
|
Flexural Property Test Method
|
ASTM D790 |
|
Hydrostatic Design Basis
|
Not pressure rated |
|
Hydrostatic Design Test Method
|
ASTM D2837 |
|
Melt Flow Rate Test Method
|
ASTM D1238 |
|
Melt Flow Rate, maximum
|
0.39 g/10 min |
|
Minimum Bend Radius, unsupported
|
304.8 mm | 12 in |
|
Tensile Property Test Method
|
ASTM D638 |
|
Tensile Strength at yield, minimum
|
20.684 N/mm² | 3000 psi |
|
Breaking Strength
|
90.718 kg | 200 lb |
|
Pull Line Type
|
Rope |
|
Pulling Tension, maximum
|
274.423 kg | 605 lb |
|
Environmental Stress Crack Resistance
|
Failure rate of 10% within 96 hours |
|
Environmental Stress Test Method
|
ASTM D1693, ESCR Condition B |
|
Conductor Elongation, maximum
|
30 % |
|
Conductor Diameter
|
1.024 mm | 0.0403 in |
|
Conductor Gauge
|
18 AWG |
|
Conductor Resistance
|
98.425 ohms/km | 30 ohms/kft |
|
Conductor Material Type
|
Copper-clad steel (CCS) |
|
Conductor Tensile Strength, minimum
|
344.738 N/mm² | 50000 psi |
|
Pulling Tension Note
|
Applies to products manufactured after December 31, 2012 |
