В наличии
ICO | Intelligent Channel Optimizer
Features and Benefits
The Intelligent Channel Optimizer (ICO) is a GUI-based tool used to maximize the throughput of RF upstream channels connected to ARRIS C4 / C4c CMTS DOCSIS® 2.0 (2Dx12U) CAMs, DOCSIS 3.0 (12U and 24U) CAMs, and E6000 CER UCAMs, UCAM-2s and ARRIS E6000n RPD.
After analyzing the noise conditions present for a particular upstream channel, the ICO employs error analysis algorithms to provide guidance on optimal modulation profile and upstream channel settings.
The ICO runs on a laptop or desktop PC and may be used remotely via Telnet, Secure Shell version 2 and SNMP.
Directly measure the noise floor, excluding any transmission (burst) from CM
Capture upstream bursts from a particular CM SID, burst IUC, or logical channel
Maximize the throughput of RF upstream channels
Optimize modulation profiles ICO calculation is done for a wide range of modulation profile types, channel widths, center frequencies and forward error correction (FEC) values
After analyzing the noise conditions present for a particular upstream channel, the ICO employs error analysis algorithms to provide guidance on optimal modulation profile and upstream channel settings.
The ICO runs on a laptop or desktop PC and may be used remotely via Telnet, Secure Shell version 2 and SNMP.
Directly measure the noise floor, excluding any transmission (burst) from CM
Capture upstream bursts from a particular CM SID, burst IUC, or logical channel
Maximize the throughput of RF upstream channels
Optimize modulation profiles ICO calculation is done for a wide range of modulation profile types, channel widths, center frequencies and forward error correction (FEC) values
- Monitors upstream spectrum and analyzes upstream SC-QAM channels
- Optimize modulation profiles & upstream SC-QAM channel parameters for maximum throughput
- Works with E6000 CER Release 4.0 or higher, C4 CMTS Release 8.0 or higher and C4c CMTS Release 8.0 or higher
- Works with ARRIS E6000n RPDs provisioned by the E6000 eCore
- The ICO analysis is accomplished for a wide range of: Modulation Profile Types, Channel Widths, Center Frequencies, Forward Error Correction (FEC) Values
Характеристики
|
Product Type
|
CMTS & CCAP software |
|
Regional Availability
|
Asia | Australia/New Zealand | EMEA | Latin America | North America |
|
Operating System
|
Java 1.5 | Windows 10 | Windows 7 | Windows 8.1 |
|
Hardware Platform Requirements, minimum
|
Network interface with IP connectivity |
Скачать
ПоделитьсяХарактеристики
|
Product Type
|
CMTS & CCAP software |
|
Regional Availability
|
Asia | Australia/New Zealand | EMEA | Latin America | North America |
|
Operating System
|
Java 1.5 | Windows 10 | Windows 7 | Windows 8.1 |
|
Hardware Platform Requirements, minimum
|
Network interface with IP connectivity |
|
Major Operation Modes
|
FFT Capture Mode | Optimizer Mode | Theory Mode |
|
Minor Operation Modes
|
Averaging mode | Iterative mode | Worst-case mode |
|
Network Protocol
|
SNMP | SNMP | SSHv2 | SSHv2 | Telnet |
|
Required CMTS Hardware
|
C4/C4c CMTS with DOCSIS 2.0 CAMs (2D x 12U) | DOCSIS 3.0 CAMs (12U and 24U) | E6000 CER with UCAM, UCAM-2 or ARRIS E6000n RPD |
|
Required CMTS Software
|
C4 Release 8.0 or higher | C4c Release 8.0 or higher | E6000 Release 4.0 or higher | E6000n RPD Release 1.0 or higher provisioned by the E6000 |
|
Resolution Requirements, minimum
|
1024 x 768 |
Поддержка продукта
