г. Москва
8 (800) 555-28-41 Перезвоните мне
Напишите нам
Системы широкополосной связи и сети доступа 70
Панели, шкафы и стойки 9 339
Кабельные сборки 11 097
Коннекторы 1 678
Сетевые системы 7 377
Разделители, комбайнеры и мультиплексоры 1 329
Опорные конструкции, инструменты и аксессуары 3 178
Назад
Источники питания для наружной беспроводной сети 12
Назад
Пассивные оптические сети (PON) 3
Назад
Сеть и управление качеством обслуживания заказчиков 4
Назад
Технология передачи радиочастотных сигналов по стекловолокну (RFoG) 2
Назад
Распределительные шкафы и аксессуары 673
Назад
Оптоволоконные адаптеры и коннекторы 560
Назад
Распределенные антенные системы (DAS) 284
Назад
Системы распределения питания 56
Назад
Структурированная кабельная система 6 863
Назад
Пассивные устройства беспроводной связи внутри зданий 139
В наличии
V65S-C3-1XR
Features and Benefits
  • Provides a future-ready antenna solution with flexibility to reassign antenna, for example GSM 1800 service to 2.6GHz LTE at a later date
  • Employs state-of-the-art ultra wideband technology providing excellent RF performance in all bands
  • RF technology flexible—suitable for LTE, UMTS, CDMA, GSM, AWS, WiMAX, and other applications from 1.7–2.7 GHz
  • Excellent RF pattern control over the full operating band and tilt range for desired coverage and interference containment
  • 4.3-10 connector significantly improves PIM consistency and smaller footprint on antenna bottom
Характеристики
Antenna Type
Small Cell
Band
Single band
Характеристики
Antenna Type
Small Cell
Band
Single band
Grounding Type
RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note
Outdoor usage
Radome Material
PVC, UV resistant
Radiator Material
Low loss circuit board
Reflector Material
Aluminum
RF Connector Interface
4.3-10 Female
RF Connector Location
Bottom
RF Connector Quantity, high band
2
RF Connector Quantity, total
2
RET Interface
8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity
1 female | 1 male
Input Voltage
10–30 Vdc
Internal RET
Low band (1)
Power Consumption, idle state, maximum
2 W
Power Consumption, normal conditions, maximum
13 W
Protocol
3GPP/AISG 2.0 (Single RET)
Ширина
170 mm | 6.693 in
Глубина
105 mm | 4.134 in
Рост
600 mm | 23.622 in
Net Weight, without mounting kit
3.8 kg | 8.378 lb
Impedance
50 ohm
Operating Frequency Band
1695 – 2690 MHz
Polarization
±45°
Gain, dBi
13.4
Beamwidth, Horizontal, degrees
70
Beamwidth, Vertical, degrees
18.5
Beam Tilt, degrees
0–20
USLS (First Lobe), dB
15
Front-to-Back Ratio at 180°, dB
27
Isolation, Cross Polarization, dB
25
VSWR | Return loss, dB
1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc
-153
Gain by all Beam Tilts, average, dBi
13.1
Gain by all Beam Tilts Tolerance, dB
±0.4
Beamwidth, Horizontal Tolerance, degrees
±3.2
Beamwidth, Vertical Tolerance, degrees
±1.4
Front-to-Back Total Power at 180° ± 30°, dB
24
CPR at Boresight, dB
19
CPR at Sector, dB
16
Wind Loading @ Velocity, frontal
118.0 N @ 150 km/h (26.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral
48.0 N @ 150 km/h (10.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear
151.0 N @ 150 km/h (33.9 lbf @ 150 km/h)
Wind Speed, maximum
241 km/h | 149.75 mph
Ширина упаковки
302 mm | 11.89 in
Глубина упаковки
212 mm | 8.346 in
Длина упаковки
726 mm | 28.583 in
Масса, брутто
8.9 kg | 19.621 lb
Цвет
Light gray
Input Power per Port, maximum, watts
300
USLS, beampeak to 20° above beampeak, dB
15
ISO 9001:2015
Designed, manufactured and/or distributed under this quality management system
Gain by Beam Tilt, average, dBi
0 ° | 13.0 10 ° | 13.2 20 ° | 13.1
CE
Compliant with the relevant CE product directives