В наличии
2UPX210B-T2
Features and Benefits
- Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt with manual override on both beams
- Each port has an integrated bias tee, and each beam has its own smart switch that automatically selects between bias tee or AISG inputs according to a predetermined priority table
- Single panel design supporting two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresight
Характеристики
Antenna Type
|
Multibeam |
Band
|
Single band |
Grounding Type
|
RF connector body grounded to reflector and mounting bracket |
Performance Note
|
Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
Характеристики
Antenna Type
|
Multibeam |
Band
|
Single band |
Grounding Type
|
RF connector body grounded to reflector and mounting bracket |
Performance Note
|
Outdoor usage | Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN |
Radome Material
|
Fiberglass, UV resistant |
Radiator Material
|
Copper | Low loss circuit board |
Reflector Material
|
Aluminum |
RF Connector Interface
|
7-16 DIN Female |
RF Connector Location
|
Bottom |
RF Connector Quantity, low band
|
4 |
RF Connector Quantity, total
|
4 |
RET Interface
|
8-pin DIN Female | 8-pin DIN Male |
RET Interface, quantity
|
1 female | 2 male |
Input Voltage
|
10–30 Vdc |
Internal RET
|
Low band (2) |
Power Consumption, idle state, maximum
|
2 W |
Power Consumption, normal conditions, maximum
|
13 W |
Protocol
|
3GPP/AISG 2.0 (Single RET) |
Ширина
|
640 mm | 25.197 in |
Глубина
|
235 mm | 9.252 in |
Рост
|
2533 mm | 99.724 in |
Net Weight, without mounting kit
|
47 kg | 103.617 lb |
Impedance
|
50 ohm |
Operating Frequency Band
|
694 – 896 MHz |
Polarization
|
±45° |
Total Input Power, maximum
|
700 W @ 50 °C |
Gain, dBi
|
17.9 |
Beamwidth, Horizontal, degrees
|
39 |
Beamwidth, Vertical, degrees
|
9.6 |
Beam Tilt, degrees
|
0–10 |
USLS (First Lobe), dB
|
21 |
Front-to-Back Ratio at 180°, dB
|
34 |
Isolation, Cross Polarization, dB
|
25 |
Isolation, Inter-band, dB
|
18 |
VSWR | Return loss, dB
|
1.43 | 15.0 |
PIM, 3rd Order, 2 x 20 W, dBc
|
-150 |
Gain by all Beam Tilts, average, dBi
|
17.6 |
Gain by all Beam Tilts Tolerance, dB
|
±0.6 |
Beamwidth, Horizontal Tolerance, degrees
|
±1.8 |
Beamwidth, Vertical Tolerance, degrees
|
±0.7 |
Front-to-Back Total Power at 180° ± 30°, dB
|
25 |
CPR at Boresight, dB
|
20 |
Wind Loading @ Velocity, frontal
|
1,102.0 N @ 150 km/h (247.7 lbf @ 150 km/h) |
Wind Loading @ Velocity, lateral
|
372.0 N @ 150 km/h (83.6 lbf @ 150 km/h) |
Wind Loading @ Velocity, maximum
|
1,497.0 N @ 150 km/h (336.5 lbf @ 150 km/h) |
Wind Loading @ Velocity, rear
|
1,135.0 N @ 150 km/h (255.2 lbf @ 150 km/h) |
Wind Speed, maximum
|
200 km/h | 124.274 mph |
Ширина упаковки
|
797 mm | 31.378 in |
Глубина упаковки
|
402 mm | 15.827 in |
Длина упаковки
|
2684 mm | 105.669 in |
Масса, брутто
|
67 kg | 147.71 lb |
USLS, beampeak to 20° above beampeak, dB
|
21 |
ISO 9001:2015
|
Designed, manufactured and/or distributed under this quality management system |
Input Power per Port at 50°C, maximum, watts
|
200 |
Beam Centers, Horizontal, degrees
|
±27 |
Gain by Beam Tilt, average, dBi
|
0 ° | 17.6 5 ° | 17.6 10 ° | 17.6 |
Internal Bias Tee
|
Port 1 | Port 2 | Port 3 | Port 4 |
Поддержка продукта