2HH-33A-R4

Антей >
Каталог >
Антенны >
Антенны базовых станций и оборудование >
Антенны базовых станций >
2HH-33A-R4

В наличии

2HH-33A-R4

Features and Benefits

Enhances network capacity through six sectors site application with only three antenna faces
Maximizes frequency spectrum utilization to increase Average Revenue Per User (ARPU)
Reduces antenna count to minimize Cap-Ex and Op-Ex costs
High gain with excellent sector edge roll-off and azimuth sidelobe suppression
Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
Supports re-configurable antenna sharing capability enabling control of the internal RET system using up to two separate RET compatible OEM radios

Характеристики

Antenna Type	Multibeam
Band	Single band
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN

Развернуть

Скачать

Цена по запросу

Добавить в заявку

Характеристики

Antenna Type	Multibeam
Band	Single band
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage \| Wind loading figures are validated by wind tunnel measurements described in white paper WP-112534-EN
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, total	8
RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	2 female \| 2 male
Input Voltage	10–30 Vdc
Internal RET	High band (4)
Power Consumption, idle state, maximum	1 W
Power Consumption, normal conditions, maximum	8 W
Protocol	3GPP/AISG 2.0 (Single RET)
Ширина	640 mm \| 25.197 in
Глубина	235 mm \| 9.252 in
Рост	1350 mm \| 53.15 in
Net Weight, without mounting kit	30.8 kg \| 67.902 lb
Impedance	50 ohm
Operating Frequency Band	1695 – 2400 MHz
Polarization	±45°
Total Input Power, maximum	400 W @ 50 °C
Gain, dBi	19.1
Beamwidth, Horizontal, degrees	38
Beamwidth, Vertical, degrees	7.4
Beam Tilt, degrees	2–12
USLS (First Lobe), dB	19
Front-to-Back Ratio at 180°, dB	37
Isolation, Cross Polarization, dB	28
Isolation, Inter-band, dB	16
VSWR \| Return loss, dB	1.46 \| 14.5
PIM, 3rd Order, 2 x 20 W, dBc	-150
Gain by all Beam Tilts, average, dBi	18.7
Gain by all Beam Tilts Tolerance, dB	±0.6
Beamwidth, Horizontal Tolerance, degrees	±2
Beamwidth, Vertical Tolerance, degrees	±0.4
Front-to-Back Total Power at 180° ± 30°, dB	29
CPR at Boresight, dB	21
CPR at Sector, dB	12
Wind Loading @ Velocity, frontal	557.0 N @ 150 km/h (125.2 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	175.0 N @ 150 km/h (39.3 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	759.0 N @ 150 km/h (170.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	574.0 N @ 150 km/h (129.0 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h \| 149.75 mph
Ширина упаковки	797 mm \| 31.378 in
Глубина упаковки	402 mm \| 15.827 in
Длина упаковки	1501 mm \| 59.095 in
Масса, брутто	41.7 kg \| 91.933 lb
ROHS	Compliant/Exempted
CHINA-ROHS	Above maximum concentration value
Цвет	Light gray
USLS, beampeak to 20° above beampeak, dB	16
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
Input Power per Port at 50°C, maximum, watts	200
Beam Centers, Horizontal, degrees	±27
Gain by Beam Tilt, average, dBi	2 ° \| 18.7 7 ° \| 18.812 ° \| 18.6

Поддержка продукта